The program is implemented as a Microsoft DirectShow filter and can connect to such players as:
Windows Media Player, Light Alloy,
jetAudio,
RadLight, Elecard MPEG Player and many others, using the DirectShow environment.
The product employs 2 filters:
• interpolation deinterlace - is used for the removing of the interlace effect from your video.
• interframe video-interference suppressor.
These filters employ the MMX to speed-up the operation that allows to use this product in real time mode on PC with CPU frequency more than 800 MHz. We do not recommend to use this program on the computers with the CPU frequency less than 800 MHz.
Alparysoft Quality Controller can be used in the following cases:
- To watch high quality films which have interlace effect. In this case you have to enable "use deinterlace" option and disable "use denoise" option.
- To watch low quality films - recorded on the home video equipment or inputted into PC from TV-tuner or from TV-in of video card. In this case if the film is not interlaced, you should enable only "use denoise" option. If the film is interlaced, you should additionally enable the "use deinterlace" option. In the "settings" option with help of the slider "Noise level" you can set the level of noise of the video, at which the filtration is performed with best quality.
You can change settings at the moment you watch your video in real time and check the performance of the filters setting different parameters and combinations.
We do not recommend to enable the filters with the high quality not interlaced films, because in this case the filtration is useless.
